Sidecars & Jaguars

Add caption

Photo From Here

Bottom Two From Here

Should have known I was going to come down with something, with it being only about a week until Thanksgiving. It's only a cold but it's a doozie. By the timing, I think I must have gotten this one from the gym rather than the school. Should be better in time for the cold weather to hit this weekend, however. In the meantime, I've got E-Types and kneelers to look at.

Beagles and Other Canines

I read the novel Is Fat Bob Dead Yet? by Stephen Dobyns recently. I knew nothing about the author prior to reading Is Fat Bob Dead Yet? but I was looking for a who-dunnit that I could breeze through on my quest to read 50 books again this year. I don't know if this one is representative of most of his work or not, but it's certainly a different type of murder mystery than I'm used to. Not that that's a bad thing. It's an entertaining book but certainly nothing like the Robert B. Parker novels I've read. Maybe more like Carl Hiaasen. But this isn't a review of Is Fat Bob Dead Yet?, it's just the set-up for the following paragraph:

Beagles don't care if you're no longer beautiful. They don't care if the great expectations you had as an eighteen-year-old knockout have become spilled jam pots on the dusty roads of life. That's why we like beagles and other canines: love and loyalty are more important to them than truth. You tell your dog you can walk on water and it will lick your hand. Its only fear is of being left behind, locked up, shut in the doghouse when you go to a fancy-dress ball or simply go shopping. Otherwise you're gravy.

Explains it rather well, don't you think? Also, I just finished book number 47. It feels like I'm coming down with something so I might spend more time in the big chair reading rather than working in the shop the next few days. I would like to finish up the sidecar fender before it gets too cold, however. I've got most of the planishing done and it looks pretty nice. I was going to give it a once over with the DA sander but I'm out of sandpaper for it. I'll either order some in or see what they've got at one of the auto parts stores around here if I feel like venturing out.

Welding Stuff

One of the students at the college brought one of these in for us to play with - battery powered stick/TIG welding power source.

Here's a couple of beads run by the students with a 7018 electrode. According to the website, you can weld with up to six or seven 1/8" electrodes before needing a recharge. You can weld with it while it's hooked up to the charger. In fact, several of the students were playing around with it for quite a while while it was on the charger and it never ran out of stored energy. I tried it with both 6010 and 7018 electrodes and it ran nice and smooth. Usually you equate small welding machines with lousy welding characteristics. Not with this one. This new technology can be a wonderful thing. The student who brought the welder in has offered me a tour of the Fronius lab. I'm going to have to take him up on that one of these days soon.

We had a practical for the mid-term this past week. Open butt Vee groove with 6010 electrodes. Since they've already had a couple of classes before they take this one, this should be relatively easy for them with the exception of the root pass. After I tell them about a thousand times how important it is to prep the plates exactly the same each and every time in order to eliminate all the variables, they start to show improvement, if they listen to me that is. 

The photo above is the root pass I ran as a demo for one of the students. He prepped the plates and tacked them together. They weren't exactly to my liking but not a bad looking root pass. One of the nice things about this class is I do quite a bit of welding running demonstrations. Always good to keep your hand in. Who knows, I might want to get a job working with the tools again someday. 

It's Finally Over

Photo From Here

Photo From Here

Photo From Here

Now that the election is over I'd like to personally thank both presidential candidates for forcing me to stop watching television and looking at political crap on the internet. I'm not aware of who won the election as I write this, but regardless, as Brother Johnny used to say, "We're boned". That being the case, it's time to stop worrying about things I can't control and head back into the shop for those things I can control, mostly, and from which I derive much pleasure. Motorcycles and vintage cars and using the skills I've developed over the past 50 or so years and, hopefully, further develop in the years yet to come. I don't know how many more I'll be blessed with but I'd like to have the opportunity to create my "masterpiece", whatever that is I decide on. In the meantime, I'll keep hammering away, both literally and figuratively, while trying to channel the spirit of one of these guys.

Rock on!

Coach Building School

Photo From Here

Ain't that a cute little thing - and I do mean little. 

The new Vintage Motorsport magazine came in the mail the other day. While looking through it I came across some info on a Master Series in Coach Building. It's a two year program that will teach you the ins and outs of coach building. It's not cheap but ignorance isn't either. $84,000 for the two years and you'll receive a degree certifying you as a coach builder. $42K per year isn't out of line for many universities these days. I don't know many of the details but I'd love to give it a go. Two years of learning from a pro I could be a real panel beater instead of just a duffer. Classes start in January.

Work, Work, Work

I've been busy the last couple of days. Went to Indy for fights on Thursday night. We had two of our guys scheduled to fight. The first guy up fought really well but got a bad decision. I normally don't complain much about the decisions but this one was bad. I had the first round scored to the opponent, the second round was close but I gave it to our guy and the third round our guy was beating the stuffin's out of the guy, but no win. The second fight was a walkover so we got a win on that one without working up a sweat. Long way to go for only six minutes of action but it was a nice night out just the same.

I made a couple of brackets to hang my bead roller off the side of the sheet metal working bench - that would be them on the right in the above photo. Not much to it but it will help with the organization of the shop and that's a big plus. The other piece in the photo is a head for the motorcycle engine stand. This one is made specifically to fit the 900/1000 Kawasaki. It was a little rusty from sitting around out in the big barn so I cleaned it up and shot a bit of primer on it while I was painting. I'll be needing it this winter when I tackle the engine on the sidecar rig.

Photo From Here

My buddy who's the Ducati single specialist stopped by the school this past week with a project for me. He's working on a '70 250 MK3 that someone bobbed the rear fender on. He's been looking for a stock one for a while but to no avail - don't know if he couldn't actually find one or couldn't find one that wasn't exorbitantly over priced. Either way, looks like it's going to be up to me to make it longer again. It would be nice if I could find another fender close to the right size/shape where all I'd have to do would be cut it off the donor and weld it on the Ducati one. I told him it might be a while before I get around to his project. I'm going to finish my fender project before tackling his. Hope to get a little more of that done this weekend, by the way.

Still working on a few projects around the shack as long as the weather is cooperating. I got the trim pieces from a couple of posts back finished up. Seems like every time I finish one, there's a two more waiting. One of these days I'll get it down to just routine maintenance - I hope!

Ethanol

The weather yesterday got up to around 80 degrees. I took off in the morning on the SV650 and headed south to run a couple of errands and to run some fuel through it so I could top off the tank and add some fuel stabilizer for winter storage.

I've been trying to address the issue of ethanol in the gasoline for all of my old motor vehicles. I always add Sta-Bil to the 5 gallon cans of gas for the tractor, mower, etc., but it doesn't seem like that's enough anymore. I put Sta-Bil 360 in the bike this time. I hope it works as advertised.

I also bought a bottle of this stuff. I don't know if it's better or worse than the Sta-Bil 360 Performance, but I'm going to add an ounce or so to the tractor and snow-blower every time I add fuel. I might try to find the BelRay product mentioned in the e-mail I received from Cycle World the other day. It had a really good article about the effects of ethanol, mostly dealing with bikes, as you would expect, but applicable to all small engine/powersports vehicles. It's my understanding that marine gas does not have the ethanol in it. It might be worth checking into that. There are a few marinas not too far from me at a couple of the lakes. The government is planning on upping the percentage of ethanol from 10% to 15%. The pump at the corner station already has it.

Here's what you get when you run the 10% thru a high performance big-block Chevy. Piston with 870 miles on it. It's not carbon build up but rather a sooty, gooey kind of deposit. Besides gumming up the inside of the engine, it fouls the spark plugs as well. 

Besides lousing up the gas formulations for those of us with old cars and bikes, your friends at the EPA have mandated changes in the oil formulations as well. Unless you have a roller cam in your old beastie, you're going to have problems with the new oil.

I bought some of this and some of this:

I need to do a little bit more research yet but I think one or the other of these should take care of all my old bikes, cars, small engines, and tractor. Seems like all the Preppers are stocking up on canned goods and ammo. I'm thinking I should be stocking up on oil that still contains the ZDDP.