Friday, October 30, 2026

Best of the West

 


The Missus and I went to Shipshewana Wednesday for the Best of the West show featuring the Sons of the Pioneers and Riders in the Sky. When I bought the tickets, I wondered what the deal was with the Sons of the Pioneers, since I've seen them in old cowboy movies from the forties. It turns out they've been performing for 93 years with the performers changing as they leave the group and are replaced as necessary. The current group we saw put on a great show of classic tunes as sung by the original group back in the day. 

They were followed by Riders in the Sky who likewise had a couple of new members. We had seen them once before many years ago and the years have taken a toll on them as well. Ranger Doug and 2 Slim were the original members still with the group. Ranger Doug's yodeling isn't as crisp as it used to be, but he said they've been performing for 49 years. The replacement for Woody Paul is a world class fiddler, and they've added an accordion player. Their music is still good as is their comedy.


The show closed with both bands on stage singing a couple of tunes and then wrapping it up with, what else, Happy Trails. 

The show was at the Blue Gate Theater, and we stayed next door at the Blue Gate Inn. With the package deal you get an all you can eat Amish style dinner and breakfast. The theater is a great place to see a show and Shipshewana is a nice place to visit if shopping is your thing.  

Tuesday, October 27, 2026

Lack of Fruit

 


The before photo of the big chunk of the elm tree that blew down a while back. You can't really see the extent of the damage on the trunk from this photo, but I need to consider having the tree taken down along with one of the big oak trees.


I finally got around to cutting up most everything I could reach from the ground or the stepladder yesterday. I'll have to get the extension ladder out to complete the job. 


The maple tree has changed color, but the lilac behind the house is still blooming, as is the neighbor's. The persimmon trees have dropped all their leaves, and it looks like the 'possums and 'coons have left me enough fruit to make a couple of loaves of persimmon bread. I usually like to wait until there's a frost before picking the persimmons, but it might be better if I pick them in the next few days, looking at the long-range forecast.

It's been a strange year for the trees. I had almost no fruit on the apple, peach and crabapple trees. The deer come in the winter and eat the apples that have fallen on the ground. I mowed underneath the trees Sunday and I did hit a single piece of fruit. Usually, it's kind of a slimy mess. While I don't miss that, I wasn't able to make an apple or a peach pie this year. If I was counting on the fruit trees to help carry me through the winter, I'd be in real trouble. Likewise, no raspberries or gooseberries either. Definitely something to consider from a "prepper's" standpoint.

I got the last hydraulic hose made up for the dump trailer yesterday. That project is nearing completion. The pins I made for the hydraulic cylinder have rusted quite a bit. Not surprising since they're made from plain jane carbon steel. My "eyeball" measurement says they're 1" OD. I think I've got a piece of stainless on the rack. Probably should make a pair and be done with it. 

Saturday, October 24, 2026

Busy, Beautiful Day

 


Some illegal immigrant decided to show his appreciation of living in this country by taking a sledge hammer to the monument of the flag raising at Iwo Jima. It wasn't the bronze one but an important one just the same. He managed to break one of the heads of the Marines off and do other damage as well. The last few years statues of famous people of this country's history have been defaced and torn down, as well as names removed from buildings and military installations. Did they think removing the statue of Christopher Columbus in Chicago or Robert E. Lee in New Orleans was going to make everyone sleep better by erasing the history of America?  History ain't always pretty, but whether you like it or not, have some respect and try to think of these historical events in the time period in which they occurred.

Busy day yesterday. I started off with a kidney stone, fortunately it passed without too much pain. Trip to the massage parlor after that, followed by lunch with TVI. I delivered his oil tank for his HD and we shot the bull for quite a while sitting on the bar stools. After lunch, Cuzzin Rick and I picked up another load of scrap.


After that, I "installed" my new garage lights. Not much to the installation - unscrew the regular bulbs, screw in the new lights. It did answer the age-old question of how many welders does it take to screw in a light bulb, however. 

I should have taken a photo of the lights when they're turned off. They look like a ceiling fan with six blades, each blade being a LED light. The pair of them was $25.00 with the shipping and they are brighter than the sun. Nice white light and the individual "blades" are adjustable from the horizontal to the vertical position, which makes it easy to point them to light up the corners.

The light on the far left is just a regular 60-watt bulb. I've got a LED bulb that's an incandescent replacement I'm going to install. Things are bright enough in there now that installing another of the fan type might be overkill. 

Friday, October 23, 2026

Boxing Recap

 


This was the first bout of the afternoon at the event I went to last Saturday. I'm a little late on the review, but that'll happen. It was a nice venue, the fairgrounds in Lafayette, In. The show was put on by a local church, that also has a boxing team as part of their mission. 

The fights were all pretty good for the most part. Several of the bouts were split decisions and a couple bouts were questionable decisions. The scoring went to the professional "10 point must" system several years ago. I'm not a fan. It seems to lend itself to different interpretations among the judges. The judging crew Saturday was made up of officials that work together all the time, but with all the split decisions, it's obvious they aren't all in synch. I've completed all the required paperwork to satisfy my license requirements for next year, but I need to decide if I want to send in my check for next year. I imagine I will. Even if I no longer coach, I can just consider it a donation. 


Should be the last fittings I need for the dump trailer. The 1/2" to 3/8" bushing is very nicely made. It's made from bar stock here in the USA - really nice-looking threads. It's a small thing, but it's one of those items where you can see the quality with just a glance.

The grommet is for the hole in the back of the toolbox for the hydraulic hose to pass through. I already installed it in the plate. However, I was busy yesterday, and I'll be busy today, so I'll probably have to wait until the weekend to get everything buttoned up.

Tuesday, October 20, 2026

Mose & Me

 


I'm a big fan of Mose. Surly and I saw him at a club in Chicago a few years back - great show, we both got autographs. I had this CD but it got away along with several others of my favorites in a carrier I had in my car. I think it somehow got traded in when I got my Veloster. I bought a new MP3 player last week. I'm hoping I've got this one on the old computer. I'm going to start loading up the player in the next few days. I'm tired of having to stop what I'm doing to buzz through the ads on my phone when I'm listening to You Tube when I'm working.

Work progress has been slow, but I had an appointment with the money guy yesterday and a heart scan today, both of which were in the middle of the day, so not much time left for working and getting dirty. The money guy said I don't have to reserve a spot under the bridge for my cardboard box, so that's good news. Hopefully I get equally good results on the scan when I see the heart doc next week.

I was looking at the screen while the tech was administering the test but I have no idea what I was looking at. I just know it's cool how they can see inside your body and watch your heart beat and see the valves opening and closing.

I did manage to get the hoses connected to the pump and valve on the trailer job. I need to cut a pass-through hole in the back of the toolbox for the hose to the cylinder, then I can get the last hose I need. After that, get a battery and a switch for the solenoid and things should be operational. 

Lots of things still on the list, but it'll all fit on one sheet of paper now. I just wish the weather would stay like it has been for a while longer - maybe until April and then warm up a bit. I love autumn weather, just don't care for what follows. 

Saturday, October 17, 2026

Lathe Progress

 I went out for breakfast with a former student yesterday - one from way in the past when I was at the Career Center. We had a really nice visit talking about the old days as well as what we're up to these days.


After I came home I made the piece for the basement lathe. There can't be more than a couple of thousands slack in it now, versus a 1/16" when I started. Next up will be the screw on the cross slide. It's a left-hand Acme thread which will be a real stretch of my machinist skills if I try to make one. However, Surly found a source for a piece of it and matching brass nuts. The end where the knob and dial fasten on would have to be modified, though. I'm going to take it all apart and come up with a plan. I've got a couple ideas already.

I'm going to a boxing match today, so no shop work. Pretty happy with the progress as of late, however. Definitely need to get the tractor running again - frost warnings last night. 

Happy birthday to Surly today!

Thursday, October 15, 2026

Cheap Shot @ USPS

 


The boss from my old gig shot me a text about some more scrap he had, so I went over yesterday morning and picked it up. Cuzzin Ricky bought me lunch the other day for the last loads I brought him. I might be able to talk a breakfast out of him with this load. 


I worked on the trailer a bit yesterday. The floor of the toolbox is made from 1/8" sheet, so I made some backing plates to stiffen the pump and valve area. I got the holes drilled in the floor, but I want to paint the plates before I bolt everything down. I'll get that done today. After that, I need to crawl under the trailer and decide what I need to do to be able to hook up the hose to the cylinder. My neighbor said he'd come over and lift the bed up for me if I needed. In fact, while I was out, I stopped there to take a look at a welding job he needs done. A new aluminum radiator has a leak around the filler neck where it joins the tank. Should be easy enough.

I'm planning on unboxing the radiator for the Allis today and decide my plan of attack on that job. I definitely need to get that done before the snow flies. I got a nasty-gram from the mailman last winter when I didn't have the snow plowed in front of the mailboxes. Normally I'm all over that but it happened when the Allis was down for repairs and I had the heart attack. I figured the mailman could've just driven right by. After all, that's what he did Monday and Tuesday when the sun was shining and it was 88 degrees. After all: "Neither snow nor rain nor heat nor gloom of night stays these couriers from the swift completion of their appointed rounds" My ass.

Wednesday, October 14, 2026

Steady by Jerks

 


'68 Sportster - the one I always wanted. I saw this one on a Facebook group I belong to. The owner must be about the same age as I am - bought one similar in'68, got called up in '69, so sold the bike. Decided he needed one like he had but most of them were chopped or beat to death, finally ended up with this one. You can go home again.


Got a decent start on rigging up the hydraulics on the dump trailer yesterday. I rode my bicycle to the auto parts store for a couple of fittings, then rode over to the plumbing supply and got a couple of pipe fittings and put another mile or so in on my way home. I worked up a pretty good sweat and was thinking I need to get more cardio. Come to find out it was close to 90 degrees and sunny which explained the sweat - still could use some more cardio just the same.

The yellow plug on the valve is the outlet to the cylinder. I've got the fittings for that already. Next up I'll bolt the pump unit and valve in place and then work on getting a hose to that. It's a single acting cylinder, so only one hose required.

I got a coat of varnish on the picture frame yesterday, I'll get a second coat on it Thursday. In the meantime, I'll get the glass for it. 

The radiator for old Allis showed up yesterday. It's supposed to rain today and tomorrow on and off, so I'll work on the trailer and tractor in the big barn. I've also got another load of scrap to pick up at my old gig. I'll get that today, rain permitting. 

Tuesday, October 13, 2026

Tractor, Trailer & More

 


Checked all the fluids in the Allis the other day and I was surprised the radiator was low. It was topped off after the mechanic finished the cylinder head repair. I had patched the radiator while it was apart, pressure tested it, and the mechanic had run it a bit with no evidence of a leak. But after running it down the lane, it was leaking again. I decided to give up on repairing it, bit the bullet and ordered a new one. The tractor's 74 years old, after all. I ordered online from Steiner yesterday morning and it should be here today. That's what I call service. 


 Making a frame for my vision board. I'd never even heard of such a thing until recently. Coach Jen steered me in that direction after one of our conversations about what I should be doing to get a few more good years. I set my target at 90 - might be a little optimistic, but that's the whole point. In the photo, the frame hadn't been glued together yet, by the way.

I've been doing a little work on my dump trailer also. I built it at the high school, but I didn't get the hydraulics hooked up due to having the heart attack. I need to get some hose fittings and then I can figure out the best placement for the pump and valve. I also need to do something with the cylinder, which has been the hold-up on the operation. I can't get a hose to the inlet, so I need to take the cylinder apart and rotate it 90 degrees or cut away a bit of the frame. I'll crawl underneath there one of these days and take a good look at things and decide what I need to do. 
 

Sunday, October 11, 2026

Sunday Recap

 


The weather has been great lately - so nice in fact it's confused the crabapple tree. There are quite a few blossoms on the tree even though most of the leaves have already fallen. It didn't produce any fruit this year, likewise neither did the other apples, and only a few peaches also. The persimmons have some fruit. Hopefully, I'll have enough fruit to make a couple of loaves of persimmon bread.


The shiny gas cap showed up late Friday evening along with the piece of brass for the basement lathe project. I've still got some paint left from painting the gas tank, so I think I'll paint the top of the intake snout. 

The brass rod is about .004" oversize, so I'll have to turn the OD a skootch when I've got it in the lathe. When I get that done, I'm going to try and tackle making a new screw for the cross slide. It's a left-hand Acme thread, something that's going to be a stretch for my ability as a lathe operator. I've cut many a thread before - metric, standard, right-hand, left-hand, and Whitworth, but never an Acme. First time for everything, though.


 And from the what in the hell was I thinking files, I went to the storage space the other day to drop something off, and when I came around the corner to leave, this chair was sitting out in the gravel. I liked the look of it but kept going. Later, when I took the cleaning lady home, we stopped to take a good look at it. All oak, no loose joints and it was originally finished with shellac, which comes right off just by rubbing a piece of sandpaper across it. The cleaning lady said I should take it home, so we loaded it up. I've got no idea what I'm going to do with it, but the cleaning lady and I will get it restored and she can put it in her hope chest if nothing else.

I did a little plumbing job for my sister-in-law yesterday morning, sharpened the spare mower blades, installed them and then cut the front yard in the afternoon. I'm waiting to hear about walking this afternoon. Depending on how that goes, mowing, machining or both.

Thursday, October 8, 2026

Odds & Sods


It doesn't look like much more than a small pile of gravel, but it's actually a small scale dry well. Since the reason I replaced the man door on the barn was due to the bottom rusting away, I didn't want the same thing to happen to the new one. Yesterday I dug a hole at the mid-point between the posts and planted a two-gallon bucket in the hole. I drilled some holes in the bottom of the bucket so the water could escape first. I also sloped the dirt so the water would head for the bucket, as well as skimming a couple of inches off the dirt outside the door to create a spot for the gravel. After it gets rained on a few times, I level it out a bit more if needed.


I also painted the gas tank on the Allis yesterday. I put another coat on after the photo so the "Zebra stripes" like you can see on the battery box are gone. And from the lipstick on a pig department, I ordered a shiny new gas cap - should be here tomorrow. I still need to check the fluids and charge the battery, but I should be ready for the first snowfall whenever that comes.


The screw for the compound on the basement lathe. There was a lot of slack when moving the tool post in and out but a 1/4" SAE washer between the handle and the dial took care of most of that. The threads on the brass piece, however, are worn out. The thread size is 1/4-20, and the OD on the part is 1/2", so I ordered a piece of stock - won't take long to make the new piece. I want to get the lathe functional before the weather turns cold. I've got a couple of projects in the basement shop that have been languishing for too long. They're nothing important really, just another loose end I'm trying to tie up. Plus, it beats sitting in the recliner all evening.


Praying Mantis on the inside of the screen the other morning. Depending on how the storm and screen doors are situated, bugs can get between them. I opened the screen door a few inches and closed the storm door and it escaped. Very interesting looking creatures. I see one around here maybe once every couple of years. 

Long list of things to do today - pretty sure the highlight of the day is going to be a tenderloin for lunch.


 

Monday, October 5, 2026

Great Day to be Outside

 


Beautiful day yesterday - in my book I'd call it perfect. I was supposed to go walkies with Coach Jen but her stepson was involved in an accident, and we decided it might be better to call it off - would've been a really good day to put in three or four miles, though. Instead, I primed the gas tank and battery box on the Allis. I've got some paint in the quart I used to paint the radiator shroud and the hood, but I didn't want to mess with the spray gun or paint it with a brush, so I ordered a rattle can of Allis orange. It doesn't have to be a perfect match. As long as it's close it'll be better than rusty orange.


It was also a great day for hanging a barn door. It took a little finagling, but I persevered just like Sgt. Preston of the RCMP - "We always get our man." If you look closely at the gap on the left side of the door, you can see a pretty healthy 1/4" up top and next to nothing on the bottom. The door frame is formed by a pair of 6x6 posts that are wrapped in sheet metal. No way I was going to be able to bump the posts outward, so I did some trimming on the sheet metal down low as well as grinding down some of the wood underneath it. It opens now without any interference even if you can't see any gap along the lower left side. 

The striker plate for the deadbolt lines up but the one for the doorknob is off by about 3/8". I'm going to make a new striker out of some thicker material as well as making it longer in order to get the screws into new wood. 

The gap under the door is the lowest spot around, so water and snow pool there. I'm going to dig out some dirt and replace it with gravel so the water will run down into the dirt rather than rusting the bottom of the door off like the other one and keep me from falling on my keister when the puddle turns to ice in the winter.

The weather's looking good for the rest of the week, so I'll continue spending some time on the outside chores and doing whatever else suits my fancy. 

Sunday, October 4, 2026

Eve of Destruction

 


Once again, or maybe still, we're on the eve of destruction. Lots of bad things going on in our country and the world. Lots of talk about nuclear weapons like when I was a young man.  When will they ever learn?


Over the years I've turned into a peacenik it seems. The Prez just sent armed forces to the Middle East and is talking about bombing Iran back into the stone age. I'm beginning to think Trump's just about as nuts as Biden was. 350 million people in this country and all the mopes in Washington can do is go to war on borrowed money. 


However, all is not doom and gloom. The little lilac in back of the house has decided to take advantage of the beautiful fall weather and bloom again. There's also a couple of blossoms on the rose bush out back. Nice little mood elevator.

 __________________________________________


Busy day yesterday. I got a message from my old boss at the part-time gig. Seems he was cleaning out some stuff and had a piece I had fabricated and wanted to know if I could use it. I didn't want it but I told him I'd pick it up and recycle it. When I swung by, he had a small pile of steel for me, so I loaded it up and then took it to Cuzzin Ricky and threw it on his scrap trailer. I also made a stop at the drug store and hardware store while I was out running around. 

Surly came down later and we shot the bull for a bit, he sandblasted a piece and I installed the lockset in the new man door for the barn. I still need to do a little prep on the door frame before hanging the new door, but pretty happy with the progress of late.

Friday, October 2, 2026

File This One .......

 


under Type A, aluminum file. That is, one that's designed for fast removal of aluminum material without loading up. The flat ones cut with a shearing action and give a nice finish as well as the fast removal of material.

When the grandson was here working on the little loader, I handed him my half-round one to use. The teeth are cut a little differently and the half-round shape is more useful if you're only going to have one. I was going to get him one of each, but I could only find a flat one. I don't remember where I got both of mine, but I've had them a long time. I've taken good care of them and never use them on anything other than aluminum or magnesium.

I'll give this one to the grandson next time our paths cross and continue looking for a half-round file for him. 

I was doing some rake and shovel work on the end of the driveway yesterday and the neighbor stopped by. Before he left, he mentioned having a new aluminum radiator that needs a little touch up weld on the filler neck - so I've got that one on the docket. Cleaned the gutters after that. Also completed my Green Level boxing license certification yesterday. It's good until October of '28, so I'll probably keep my credentials up until then at least. 

I bought a new man door for the big barn the other day - need to get that hung up. I did finish the cedar chest - looks pretty sexy. Sanded down the gas tank and battery box on the old Allis - need to get it primed and painted.

Lots to do, but this is my favorite time of year to be outside. Ride the bike, maybe do some hiking, some work on the shack, and then settle in for the winter.