I got the bolt for the pipes taken care of so I thought I'd see about hooking up the clutch release and cable so I could finish that all up. If you look at the left side of the photo you can see a crack running across the release mechanism. There's also a couple of other spider cracks that aren't really visible in the photo. Don't know why it would crack there other than the big crack is on the bend line and the part is perhaps made from some steel with a little carbon in it. I'll weld it up and see how it looks. There isn't any stress there. It's just to make sure the clutch cable doesn't get into the clutch assembly. Just glad I noticed it.